Home > Products > Magafor > Counter Sinking > Single Flute Chamfering Cutters >

100° Tin Coated Cobalt Single Flute Chamfering Cutters
100o Tin Coated Cobalt Single Flute Chamfering Cutters


 
 



Description
 

The characteristics of the single flute chamfering cutters are similar to those of the deburring tools "with hole". They do vary on the following points: Greater countersinking capacity, from the point to the outside diameter (up to dia. 30 mm) and simultaneous drilling and countersinking on thin elements (laminates, aluminum, wood).

Constant finish-grind profile makes it possible to obtain many easy regrinds: a mere touch of the grinder to the tooth is sufficient. We recommend lubricating.

Item # Description Material Angle D inch D mm Min Capacity inch Max capacity inch d L
84482510000 100 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 100 .394" 10 3/64" .394" .236" 1 3/4"
84482512000 100 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 100 .472" 12 5/64" .472" .315" 1 7/8"
84482515000 100 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 100 .59" 15 5/64" .590" .315" 2 1/8"
84482520000 100 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 100 .787" 20 5/64" .787" .394" 2 1/2"
84482525000 100 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 100 .984" 25 1/8" .984" .472" 3"
84482530000 100 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 100 1.181" 30 1/8" 1.181" .472" 3 3/8"