Home > Products > Magafor > Counter Sinking > Single Flute Chamfering Cutters >

120° Tin Coated Cobalt Single Flute Chamfering Cutters
120o Tin Coated Cobalt Single Flute Chamfering Cutters


 
 



Description
 

The characteristics of the single flute chamfering cutters are similar to those of the deburring tools "with hole". They do vary on the following points: Greater countersinking capacity, from the point to the outside diameter (up to dia. 30 mm) and simultaneous drilling and countersinking on thin elements (laminates, aluminum, wood).

Constant finish-grind profile makes it possible to obtain many easy regrinds: a mere touch of the grinder to the tooth is sufficient. We recommend lubricating.

Item # Description Material Angle D inch D mm Min Capacity inch Max capacity inch d L
84482310000 120 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 120 .394" 10 3/64" .394" .236" 1 3/4"
84482312000 120 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 120 .472" 12 5/64" .472" .315" 1 7/8"
84482315000 120 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 120 .59" 15 5/64" .590" .315" 2 1/8"
84482320000 120 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 120 .787" 20 5/64" .787" .394" 2 1/2"
84482325000 120 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 120 .984" 25 1/8" .984" .472" 3"
84482330000 120 Deg Cobalt TIN Coated Single Flute Chamfering Cutters HSS-E Cobalt 120 1.181" 30 1/8" 1.181" .472" 3 3/8"