Home > Products > Magafor > Micro-Milling > Miniature Ball-End End-Mills >

Hard'X Coated Carbide Standard Series Miniature Ball-End End-Mills
Hard'X Coated Carbide Standard Series Miniature Ball-End End-Mills


 
 



Description
 

Hard'X: AITiN with a high hardness (3,700 Hv), this coating shows a high thermic stability and an excellent protection against heat and wear. Ideal for dry machining — high speed cutting — in treated steels and dies. The higher concentration of aluminum in the coating creates for a lower friction coefficient providing greater tool life than traditional TiAIN offerings.

Item # D Diameter d2 Shank L Length \ Flute Length
85290030-H .0118" .118" 1 1/2" .040"
85290035-H .0138" .118" 1 1/2" .040"
85290040-H .0157" .118" 1 1/2" .040"
85290050-H .0197" .118" 1 1/2" .060"
85290060-H 0.0236" .118" 1 1/2" .060"
85290070-H 0.0276" .118" 1 1/2" .080"
85290080-H 0.0315" .118" 1 1/2" .080"
85290090-H 0.0354" .118" 1 1/2" .100"
85290100-H 0.0394" .118" 1 1/2" .120"
85290110-H 0.0433" .118" 1 1/2" .120"
85290120-H .0472" .118" 1 1/2" .160"
85290140-H .0551" .118" 1 1/2" .160"
85290150-H .0591" .118" 1 1/2" .160"
85290160-H .0630" .118" 1 1/2" .160"
85290180-H .0709" .118" 1 1/2" .200"
85290200-H .0787" .118" 1 1/2" .200"
85290250-H .0984" .118" 1 1/2" .275"
85290300-H .1181" .157" 1 3/4" .400"
85290350-H .1378" .157" 1 3/4" .400"
85290400-H .1575" .197" 2" .475"
85290450-H .1772" .197" 2" .475"
85290500-H .1968" .236" 2" .550"
85290550-H .2165" .236" 2" .550"